A&D FC-5000Si - Unit Weight, Tare, Comparator Limits & Total Count Stored

5-4. Unit Weight, Tare, Comparator Limits & Total Count
Stored
The scale is initially set to store the ID numbers with a unit weight and an item code
only. However, it can be set to store a tare weight, comparator limits and/or total count
also by setting F-Function f-01-05.
1. First register a unit weight and a tare weight by
any method. If necessary, set the comparator
limits and use the M+ accumulation.
2. Go to step 2 of section “5-1. Store Unit
Weight By ID Numbers”.
When you recall a unit weight by the
ID key, the tare, comparator limits and/or
total count are also recalled along with the unit weight.
      
.
888-510
8
81
pcs
 2AWEIGHT (kg)
12345617890.0004678id-123456
 23SAMAUUW (g)1 ABCDEFGHIJKL
12345617111.000
“id-00000”, the special memory area, does not store a tare
weight, comparator limits and total count along with unit weight.
25