Aastra 400 Series - Preparing the Measurements

Planning
37
Planning Aastra 400 DECT systems as of R1.0
syd-0457/1.0 – R1.0 – 10.2012
5. 3. 2 Preparing the measurements
Drawing up a situation plan
• The situation plan records approximately the
number and size of the coverage ranges required.
• The measurements provide the ideal locations for
the radio units.
Radio supply and zone formation
• Create a sensible distribution, e.g. several zones in
the factory and administration (porter’s lodge,
basement, etc., in different zones).
• Make a note of the connection capacity required
(number of simultaneous calls) for each zone to de-
termine the number of radio units (see also "Traffic
density", page 42).
Porter's
lodge
Factory
2 oors
warehouse /
basement
5 oors
archive /
basement
Administration
5
3
3
1
2
4
Zone
Zone
Zone
Zone
Zone
Zone