DECT Measuring Device ME-8 (test kit)
47
Planning Aastra 400 DECT systems as of R1.0
syd-0457/1.0 – R1.0 – 10.2012
6 DECT Measuring Device ME-8 (test kit)
New as well as already installed DECT systems can be measured out and optimised
with the DECT measuring device ME-8. For easier handling during the measuring
procedure, the test radio units can be powered with battery packs. The headsets
are connected to the test cordless phones (referred to below as test phones) and
enable simultaneous visual and acoustic checking of the connection quality as well
as the communication among those conducting the measurement during the
measuring procedure.
The test kit contains the following equipment:
• 2 SB-8TEST test radio units with HEX rotary switches
• 4 test phones Office 135pro with test software
• 2 lead-acid batteries 12 V
• 2 charging units for lead-acid batteries 12 V
• 2 cables for supplying power to the test radio units from lead-acid battery
• 2 plug-in power supply units for supplying power to the test radio units from a
230 V network
• 4 plug-in power supply units for charging the test phones directly
• 2 headsets for connecting to the test phones
• various user's guides and quick user's guides
Fig. 18 Test kit and its contents
To Next Page
Loading...
