DECT Measuring Device ME-8 (test kit)
53
Planning Aastra 400 DECT systems as of R1.0
syd-0457/1.0 – R1.0 – 10.2012
Activating "Look Around Mode" when the cordless phone is in another
state:
1. Long-click the ”M” key to access the configuration menu
2. Press the ”M” key repeatedly until "Test" appears
3. Press Foxkey "Test"
4. Press the “Look” Foxkey
Exiting "Look Around Mode":
Long-click 4 or long-click C
6. 3. 1. 1 Displays in "Look Around Mode"
Various information is available in "Look Around Mode" in 4 lines: There are 3 dis-
plays in all, and you can move from one to the next by pressing the ”i” key:
Fig. 20 Displays in "Look Around Mode"
The standard display is active after entering "Look Around Mode". The following ex-
ample shows the standard display during a scanning procedure in test system T:
“i“ key
“i“ key
“i“ key
Detail display of “Bearer Information“
Detail display of “Connection quality“
Standard display
To Next Page
Loading...
