DECT Measuring Device ME-8 (test kit)
52
Planning Aastra 400 DECT systems as of R1.0
syd-0457/1.0 – R1.0 – 10.2012
6. 3 Operating modes of the cordless phones for test purposes
All Office 135/135pro cordless phones are able to perform various measurements
for test purposes. Three different modes of operation are available:
• "Look Around Mode"
Up to 32 radio units can be logged and their parameters displayed.
• "Show Measurement Mode"
Display of the current radio units connection parameters
• "Show Handover Mode"
Acoustically and/or visually indicates the handover to another radio unit during
a connection.
Additional test phone functions are available in ”Look Around Mode” which make it
easy to measure out a DECT system. For example only the test phones are able to
set up a call via a test radio unit. In the following chapters we deal in particular with
the different modes of operation. The possibilities for the test phone are duly noted
in each case.
6. 3. 1 "Look Around Mode”
Activating the "Look Around Mode" on a switched off cordless phone:
1. Switch on the cordless phone.
2. During search press the C key: "No System" appears
3. Long-click key 4
Note:
If the cordless phone is already connected to a system, long-click 4
does not switch to "Look Around Mode" but rather to "Show Measure-
ment Mode" (see "Show Measurement Mode", page 66).
To Next Page
Loading...
