___________________________________________________________________________________________
CS AASTRA 6753i IP PHONE USER GUIDE AASTRA – 2786-002
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 19 OF 86
3 Getting Started
3.1 Installation and Setup
If your system administrator has not already setup your 6753i, please refer to the Aastra Model
6753i Installation Guide for basic installation and physical setup of the 6753i.
Your system or network administrator manages the configuration and updates for the IP
phones on the configuration server.
New updates to your phone can be automatically scheduled from the server by your system
administrator. Automatic updates are scheduled during non-business hours or slow call
periods.
3.2 Startup Sequence
The 6753i automatically begins the startup sequence as soon as it is connected. The phone goes
through this process the first time you plug in your phone and every time you restart your phone.
The following screens display:
Other startup screens only appear the first time you connect your phone, or if your phone has been
set back to factory defaults.
3.2.1 Configuration and Updates
The 6753i then checks settings and looks for new configuration and firmware updates on the
configuration server. If a new update is found, the phone displays the update it is installing (either
"Updating Config" or "New Firmware"). This process could take a few moments while the
configuration server downloads the latest updates.
To Next Page
Loading...
