Aastra 6753I - Default Display; Use Park and Pickup; Call Forwarding Always, Busy, no Answer

___________________________________________________________________________________________
CS AASTRA 6753i IP PHONE USER GUIDE AASTRA – 2786-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 54 OF 86
6.6.1 Default Display
 The Park key is visible only when a call is connected.
 The Pickup key is visible only the phone is idle or when the phone is off hook.
6.6.2 Use Park and Pickup
Step
Action
Result
Park a Call:
1.
From a connected call:
Press the Park key.
The feature access code for Park is
dialed and you hear instructions given by
the system.
2.
 Dial the number where you want to
park the call plus the key.
Or
 Dial to park the call on your
number.
If the call is parked successfully, you hear
the message “Your call has been Parked.
Thank you.”
3.
 Hang up the handset.
Or
 Press the Goodbye key.
Pick up a Parked Call:
1.
Lift the handset.
The Pickup key appears.
2.
Press the Pickup key.
You hear the instructions given by the
system.
3.
 Dial the number where the call was
parked plus the key.
Or
 Dial to pick up a call parked
on your own number.
You are connected to the parked call.
6.7 Call Forwarding Always, Busy, No Answer
The following procedures apply to all Call Forwarding modes using keys assigned as Call
Forwarding activation/deactivation keys:
 Call Forwarding Always
 Call Forwarding Busy
 Call Forwarding No Answer
 Call Forwarding Always to Voicemail