___________________________________________________________________________________________
CS AASTRA 6731i IP PHONE USER GUIDE V3.2.2 AASTRA – 2817-002
CLEARSPAN® IS A RGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 24 OF 82
Automatic Callback
Deactivation
Allows you to monitor a busy party and automatically establish a call
when that party becomes idle. You can deactivate all callbacks that
you have left on other parties by dialing the appropriate feature
access code.
Calling Line ID
Delivery Blocking
Persistent Activation
or Deactivation
Enables you to “persistently” block delivery of your calling line ID
to the called party.
Calling Line ID
Delivery Blocking per
Call
Overrides the blocking of the calling line ID (CLID) so you can
block the delivery of your identity for the next call. At the end of
the call, the presentation of your identity is restored to its
“persistent” status.
Calling Line ID
Delivery per Call
Overrides the persistent presentation of the calling line ID (CLID)
so you can allow the delivery of your identity for the next call. At
the end of the call, the presentation of your identity to the
“persistent” status.
Call Waiting Persistent
Activation/Deactivation
Enables you to answer a call while already engaged in another
call. Call Waiting is “On” by default, but can be deactivated.
Cancel Call Waiting
per Call
Allows you to disable Call Waiting for the next or current call.
Clear Voice Message
Waiting Indicator
Clears the voice message indicator lamp.
Customer Originated
Trace
Allows you to start a trace after an obscene, harassing, or
threatening call.
Prevents redirected calls from being redirected again by the
called party.
Music on Hold Per-
Call Deactivation
Allows you to enable/disable Music On Hold on either a per-call
or persistent basis. This feature is especially useful when
participating in a conference call.
Allows you to set the number of rings before a call is forwarded
by setting the no-answer timer.
Allows you to enter an account code before making a call. You
are prompted for an account code, you dial the code, receive
confirmation, and then proceed with the call as usual. The
sequence is as follows:
[Off-hook] [FAC] [prompt] [code] [confirmation] [dial tone] [call]
Allows you to call another station, where the system requests that
the destination station automatically answer, providing intercom-like
functionality.
A user or administrator can specify an accept list and a reject list.
These are used to screen incoming Push-To-Talk sessions.
The accept list indicates which users are allowed to call a
station.
The reject list indicates which users are not allowed to call a
station.
In both lists, a wildcard can be used, which indicates all stations.
To Next Page
Loading...
