Aastra Clearspan 6731i - Speaker and MWI Status Lamps; Speaker Lamp; Message Waiting Indicator Lamp; Volume Keys

___________________________________________________________________________________________
CS AASTRA 6731i IP PHONE USER GUIDE V3.2.2 AASTRA – 2817-002
CLEARSPAN® IS A RGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 26 OF 82
3.9 Speaker and MWI Status Lamps
The Speaker lamp and the Message Waiting Indicator (MWI) lamp provide visual status
indications.
3.9.1 Speaker Lamp
The speaker lamp is located beside the Speaker key.
Speaker LED Status
Description
On Solid
You are in Speaker mode.
Slow Flash
You are in Headset mode.
3.9.2 Message Waiting Indicator Lamp
The Message Waiting Indicator (MWI) lamp is located at the top right of the phone.
MWI LED Status
Description
Slow Flash
You have a new message (s).
Rapid Flash
You have an incoming call.
Even Flash
One or more calls are on hold.
3.10 Volume Keys
You can adjust the volume on the handset, headset, speaker, and ringer using the Volume keys.
Step
Action
Result
Set Ringer Volume:
1.
Leave the handset in the cradle.
2.
Press the Volume keys .
The Ringer displays on the screen and
you hear the current ringer volume.
You can also set the volume to OFF.
Set Handset Volume:
1.
Lift the handset
You hear dial tone at the current sound
level.
2.
Press the Volume keys .
The Handset volume indicator displays
on the screen. The handset remains at
this volume until it is adjusted again.
Set Headset Volume:
1.
Press the Volume keys
while on a call.
The Headset volume indicator displays
on the screen. The headset remains at
this volume until it is adjusted again.
Set Speaker Volume:
1.
Press the Volume keys
while on a call and talking on the
Speaker.
The Speaker volume indicator displays
on the screen. The speaker remains at
this volume until it is adjusted again.