Aastra Clearspan 6731i - Managing Active Calls

___________________________________________________________________________________________
CS AASTRA 6731i IP PHONE USER GUIDE V3.2.2 AASTRA – 2817-002
CLEARSPAN® IS A RGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 46 OF 82
5.2.1 Answer an Incoming Call
If the phone is already connected to a call, pressing the line appearance key for the new incoming
call automatically places the connected call on hold and answers the new call.
If you cannot answer, the call is redirected to a pre-defined destination such as your voice mailbox.
Step
Action
Hands-free Operation:
1.
 Press the line appearance key.
Or
 Press the Speaker key.
Headset:
1.
Press the Speaker key.
Handset:
1.
Lift the handset.
5.3 Connected Call
The connected state screen displays when you are talking to someone on the phone.
02:23
1003
Mary Jones
1
5.4 Handle Calls Using the Speaker
The Speaker allows you to speak to someone without using the handset or headset. The Audio
Mode for your phone is set to “Speaker” by default. See the Set Audio options.
Step
Action
Dial using the speaker:
1.
Press the Speaker key and enter a number from dial tone.
Answer a call using the speaker:
1.
Press the Speaker key or the line appearance key.
Switch between the speaker and handset in speaker audio mode:
1.
 Lift the handset to go back to the handset.
 Press the Speaker key to switch back to the speaker.
Switch between the speaker and the headset in speaker/headset audio mode:
1.
Press the Speaker key.