Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
i220 SIP set 05/2008 Page 7-5
7.2.3.2 Updating of the set software via web interface
Attention :The Web interface is available only when the i200 set is in configuration mode.
From a network PC, open Internet Explorer:
• Enter the IP address of the i220 set: http://10.3.2.57
• In the "Network Password" window, enter the password
Figure 7.2 Enter the password
User name : administrator
Password : 784518
Select "Remember my password"
• Main page to configure the i220 settings:
Figure 7.3 Main page of the web interface (i220 set)
To Next Page
Loading...
