Aastra M740E / i740N - Aastra Sip Phone Configuration Modes; Figure 9.10 Configuring an SIP Phone 5 Xi in a Simplified Environment

Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
SIP PHONES 51i, 53i, 55i AND 57i 05/2008 Page 9-17
9.11 Aastra SIP phone configuration modes
You can configure SIP phones through:
• Direct access to the phone
• Access via the phone’s WEB interface
• By loading the configuration files via DHCP/TFTP.
Aastra Matra recommends configuring the SIP phones using the files aastra.cfg and @MAC.cfg, to
allow rational management of a pool of phones.
However, to quickly implement some phones on a breadboard, you may envisage direct
configuration on the phone or via the WEB interface.
Example: configuring an SIP phone 5xi in a simplified environment
Figure 9.10 configuring an SIP phone 5xi in a simplified environment
'+&3
173

6,3SKRQH[L
6WDQGDORQH


,36ERDUG

6,3DFFHVVSRLQW
7)73VHUYHU
37

'+&3
173

6,3SKRQH[L
6WDQGDORQH


,36ERDUG

6,3DFFHVVSRLQW
7)73VHUYHU
37
