AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 9-4 05/2008 SIP PHONES 51i, 53i, 55i AND 57i
9.5 Connectors for SIP phones 53i, 55i and 57i
Figure 9.5 Bottom side
Nota : The Ethernet port marked PC does not supply inline power onto other network devices!
Nota : Power adapter and PoE (via LAN or via PoE inline power injector) can be connected at
the same time, means redundancy possible..
Port for power supply (only
necessary if PoE is not
supported on the LAN)
LAN port: This port is used to
connect the phone to the network
PC port: This port is used to
connect a second
network device (e.g.PC)
To Headset (optional)
Not available on 51i
To Handset
To external modules 536M
and 560M (only 53i, 55i and
57i)
To Next Page
Loading...
