AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 1-2 05/2008 About this document
1.5 Terminology
1.5.1 Terms and expressions
CPE-ID:Customer Premises Equipment-IDentification.
Unique identification number of the set, coded on 16 bytes and allocated in the factory on
manufacture. The CPE-ID must be supplied for all remote access features. Users can consult the
CPE-ID of the set and public access is provided.
Dual-homing:Enables to declare an IP subscriber on a backup PBX when the main PBX
concerned is unavailable (default or network problem). The subscriber can continue to send and
receive calls.
Internet:World-wide communication network.
Local display:Display handled by the set without PBX intervention.
P1 range:Previous range of digital sets.
RJxx:Connector standard.
SIP set:IP set using the SIP protocol (Session Initiation Protocol).
To Next Page
Loading...
