Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
SIP PHONES 51i, 53i, 55i AND 57i 05/2008 Page 9-27
9.11.2.7 Restoring the factory settings of the SIP Phone
Procedure:
• Login in Administrator mode
• Click on ’Operation > Reset. In ’Remove local configuration settings’ field, click on <Remove>
button. This removes the last customized configuration settings made on the phone.
• Click on ’Operation > Reset. In ’Restore to Factory defaults’ field, click on <Restore> button.
This restores all factory defaults, and removes any saved configuration and directory list files.
• Click on <OK> to confirm your choice.
• The taking into account requires a restarting of the SIP phone. Click on ’Operation > Reset.
In ’Restart phone’ field, click on <Restart> button.
Figure 9.15 Restoring the factory settings of the SIP Phone
To Next Page
Loading...
