AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 9-18 05/2008 SIP PHONES 51i, 53i, 55i AND 57i
9.11.1 Direct configuration on the 5xi phone
You can access the manual configuration of the phone via the “Options” key.
Location of the “Options” key on phone 5xi:
A password is required for the parameters reserved for the administrator. By default, this password
is 22222
The choice of the menus is done while using navigation keys and/or softkeys (55i and 57i phone).
Pressing the UP and DOWN arrow keys lets you view different status and text messages on the
LCD display (if there is more than 1 line of status/text messages). These buttons also let you scroll
through menu selections, such as the Options List.
Pressing the LEFT and RIGHT arrow keys lets you view the different line/call appearances. While
in the Options List, these keys allow you to exit or enter the current option. When you are editing
entries on the display, pressing the LEFT arrow key erases the character on the left; pressing the
RIGHT arrow key sets the option.
Use the softkeys that display for each option to change a selected option. For example, press the
’Done’ softkey button to save the configuration change.
To configure each parameter, use the contextual keys (softkeys):
• ‘Backspace’ : to delete or change the value or the contain of the parameter
• ‘Done’ : to save the changes and exit the current option.
• ‘Cancel’ :to exit without saving changes
To Next Page
Loading...
