AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 8-28 05/2008 SIP PHONEs 480i, 9112i and 9133i
8.9.3.2 Configuring the TFTP server provided with the NCS software
The TFTP server PumpKIN (freeware) is delivered with the NCS software since version G2J.
The TFTP server PumpKIN is installed as a service (TFTP-PumpKIN).
In the Services window, select the TFTP-PumpKIN application.
Right-click on the line TFTP-PumpKIN and select Properties. The TFTP-PumpKIN Service
Properties window appears.
Set TFTP-PumpKIN service start to automatic. It is obligatory to start the TFTP-PumpKIN server in
service mode because the TFTP-PumpKIN service then starts the TFTP-PumpKIN server with low
priority.
To Next Page
Loading...
