Aastra M740E / i740N - Page 188

AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 8-38 05/2008 SIP PHONEs 480i, 9112i and 9133i
#sip customized codec: payload=8;ptime=20;silsupp=off,payload=18;ptime=20;silsupp=off #
coding laws (payload=8 G711.A, 0 for G711 mu, 18 for G729)
sip mode: 0 # The value 0 is obligatory for NeXspan
###########################################################################
# Loading a directory in the phone
###########################################################################
#
directory disabled: 0 # The private directory is accessible on the phones.
directory 2: AMT_NeXspan_directory.txt# Loading private directory file (200 items max)
#
# Format of the directory file ‘AMT_NeXspan_directory.txt’:
#
# Surname1 First name, number1, 1, private
# Surname2 First name, number2, 1, private
# …
#the field ’Surname First name’ is limited to 15 characters
###########################################################################
call forward disabled: 1 # Forwarding not used, performed by NeXspan
suppress dtmf playback: 1 # Silent DTMF transmission
callers list disabled: 0 # Call log is accessible on the phones
missed calls indicator disabled: 0 # Display of missed calls on the phone
redial disabled: 0 # Redial key activated
conference disabled: 0 # Conference key activated
call transfer disabled: 0 # Transfer key activated
ring tone: 4 # Ring tone for inbound call: 0 to 4 (5 = silence)
tone set: FR # Ring tone for Australia, Europe (generic ring tones), France
Germany , Italy, United Kingdom, the US (default – also used
in Canada)
sip forward mode: 0 # The value 0 is obligatory for NeXspan
sip cancel after blind transfer: 1 # Blind transfer method
auto resync mode: 3 # Automatic synchronisation activated
auto resync time: 03h00 # Synchronisation time: the request will be run between
03:00 and 03:15 (hh:mm format for the country languages
different from the French and Spanish
###########################################################################
# Configuration of QoS
###########################################################################
#
tagging enabled: 1 # QoS level 2: 802.1Q marking validated (phone+PC)
# The following QoS values are recommeded for NeXspan:
tos sip: 40 # QoS level 3: DiffServ marking=28h
tos rtcp: 46 # QoS level 3: DiffServ marking=2Eh
tos rtp: 46 # QoS: DiffServ marking=2Eh
tos priority map:(46,6) (46,6) # Correspondence between DiffServ and priority level 2
VLAN id: 2 # VLAN number for phone traffic (ToIP)
VLAN id port 1: 3 # VLAN number for Data traffic from the PC: this