EasyManua.ls Logo

Aastra M740E / i740N - Page 253

Aastra M740E / i740N
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
SIP PHONES 51i, 53i, 55i AND 57i 05/2008 Page 9-43
tos priority map: (46,6) # Correspondance entre DiffServ et priorité niveau-2
# # Relation between DiffServ and priority level-2
QoS eth port 0 priority: 5 # Non applicable sur version > ou = à 1.4
# # Non applicable on version > or = to 1.4
#QoS eth port 1 priority: 1 # Priorité niveau-2 pour le trafic Data du PC (valeur de 0 à 7)
# # priority level 2 for traffic date on computer (value between 0 to 7)
#priority non-ip: 0 # priorité / paquets non IP (valeur de 0 à 7, par défaut 5)
# # priority / packet no IP (values between 0 and 7, by default 5)
#
### Nota: Fonctionnement de la QoS
### Le trafic est marqué au niveau 2 (VLAN) et 3 (DiffServ) entre le poste et le réseau. Le poste retire le marquage
### sur le trafic à destination du PC et marque le trafic venant du PC vers le réseau (VLAN id port 1 et QoS eth port 1 priority).
### Le poste accepte des trames marquées dans le VLAN ToIP et émet le trafic dans ce même VLAN avec la priorité QoS
### (eth port 0 priority).
### Au niveau 3 la signalisation et la voix sont marquées B8h.
###
### NB : QoS Functioning
### The TOS is on level 2 (VLAN) to the traffic and on level 3 (DiffServ) between the set and the network.
### The set update the ToS on the traffic to the PC brand and traffic coming from the PC to the network (VLAN id port 1 and
### QoS eth port 1 priority).
### The set post accepts tagged frames in the VLAN ToIP and send traffic in the same priority with VLAN QoS (eth port 0 priority).
### At level 3, the value of ToS to the the data and voice is B8h.
###
###################################################################################################
######################
# Paramétrage du Proxy SIP (IPS, GSI)
# SIP proxy settings #
###################################################################################################
######################
sip proxy ip: 131.129.1.30 # Adresse IP du point d'accès SIP (GSI)
# # IP addres of SIP access point(GSI)
sip proxy port: 5060 # port dédié au protocol SIP 5060
# # protocol SIP port 5060
sip registrar ip: 131.129.1.30 # Adresse IP du point d'accès SIP (GSI)
# # IP address SIP access point (GSI)
sip registrar port: 5060 # port dédié au protocol SIP 5060
# # protocol SIP port 5060
### LES VALEURS SUIVANTES SONT OBLIGATOIRE SUR NEXSPAN #
### THE FOLLOWING VALUE ARE MANDATORY ON NEXSPAN #
sip registration period: 3600 # valeur 3600 secondes par défaut
# # value by default 3600 second
sip transport protocol: 1 # 1=UDP, 2=TCP
sip rtp port: 40000 # n° port RTP à 40000
# # n° RTP port Nexspan value 40000
#sip session timer: 0 # valeur par défaut ## default value
#sip T1 timer: 0 # valeur par défaut ## default value
#sip T2 timer: 0 # valeur par défaut ## default value
#sip transaction timer: 4000 # valeur par défaut ##default value
#sip auth name: # valeur par défaut ## default value
#sip password: # valeur par defaut ## default value
sip user-agent: 1 # Envoi du 'user agent'
#
###################################################################################################

Table of Contents

Related product manuals