AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 4-6 05/2008 Installation of sets in the M7xx range
4.2.4.3 Starting
The M725 terminal is recognised in PBX software release 4.1 and later. Nevertheless, it may be
used in previous releases of the software; in this case, it is recognised as a digital set on all the lists
on which the connected set type appears. This behaviour may be corrected by declaring the M725
set type via an installer MMC.
Language synchronisation takes place automatically once the set is connected.
4.2.4.4 Default settings upon delivery
Current ring tone: 4
Current ring volume: 2
Contrast: 4
Key beep: 2
Group listening: 2
Handset listening: 6
To Next Page
Loading...
