AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 4-30 05/2008 Installation of sets in the M7xx range
Example: Press
Press
You will hear 2 confirmation beeps, then automatic display of the first calibration screen
:
Press the cross centre situed at the top left of the screen with your stylet.
Automatic display of the second calibration screen:
Press the cross center flashing at the bottom right of the screen with your stylet.
The set shifts to idle, and displays the home page.The set is ready for use.
Nota : In case of error or change, to change the language, press "Config", select the menu
"Settings" and in the "Language" menu, press the arrows to select the language desired,
and press "OK" to confirm which returns you to the idle home screen.
M780
-- Ry.yxx --
Choose display language
Français
OK
Press the centre of the cross
located at the top left of the screen
with your stylet to (re)calibrate
your touch-sensitive screen.
Press the centre of the cross
located at the top left of the screen
with your stylet to (re)calibrate
your touch-sensitive screen.
O
To Next Page
Loading...
