ABB AC 800M Manual

Ethernet Address for PM8xx (Except PM891) Section 1 Introduction
52 3BSE036351-510 A
Ethernet Address for PM8xx (Except PM891)
Each TP830 Baseplate is provided with a unique Ethernet address that provides
every CPU with a hardware identity.
This functionality takes the form of two identification addresses residing in the 
non-volatile memory of the TP830 Baseplate. The lowest address (a 12 character
Hex code) is located on an adhesive label attached to the TP830 Baseplate. The
remaining address is the lowest +1. See Figure 14 on page 53 for label location
details. See software documentation for details on loading the software and using
Ethernet address.

ABB AC 800M Specifications

General

Brand	ABB
Model	AC 800M
Category	Controller
Language	English