Section 2 Installation Site Selection and Building Requirements
3BSE036351-510 A 61
• Grounding:
– Grounding, cable selection and cable routing must be considered for
electromagnetic interference-free operation. Planning considerations are
discussed in the subsequent sections.
• Other requirements:
– Room lighting independent of the equipment power source. A battery-
powered emergency lighting system is recommended.
– A well-developed process connection, with or without marshalling
facilities.
– Effective grounding through a net of copper bars
– Cable routing observing standard installation regulations.
– Availability of power and other necessary utilities.
– Observation of standards and legal regulations.
– Sufficient free space in front of the cabinet in order to fully open the
doors. For safety reasons there must always be adequate space available,
even with the doors in the fully open position.
For additional information regarding design considerations, see Appendix B, Power
Consumption.
Electro-Magnetic Compatibility
The AC 800M units are intrinsically EMC compatible according to CE marking
rules. For additional information regarding Electro-Magnetic Compatibility,
see Appendix D, Directive Considerations.
To Next Page
Loading...
Need help?
General
