5.4.10.3.2 Add a screen title
1. Double-click on “PLC_VISU” in the device tree.
2. Select “ToolBox”.
3. Select “Common controls”.
4. Drag and drop “Label” to the page.
5. Type in "Start drilling condition".
5.4.10.3.3 Further lines and labels
1. Double-click on “PLC_VISU” in the device tree.
2. Select “ToolBox”.
3. Select “Basic”.
4. Drag and drop the line. Then drag the line to the needed length.
Example project > Create visualization
2021/06/293ADR010635, 2, en_US54
To Next Page
Loading...
