ð
As a result, you can see the following system structure which represents AC500 communication
channels (Ä AC500 User Documentation for details on various non-safety hardware settings).
Fig. 66: AC500 communication channels
NOTICE!
Pay attention to PM5xx Non-safety CPU settings (“Behaviour of Outputs in Stop”, “Stop on
Error Class” and “Warmstart”
Ä
Chapter 3.1.6 “SM560-S and PM5xx interaction”
on page 51).
3. To create new users and maintain existing ones, go to “Project Settings…” .
Configuration and programming
System configuration and programming > Creation of new project and user management
30.03.2017 AC500-S 171
To Next Page
Loading...
