ABB AC500-S - Page 183

5. Using “Add Device …” menu on the context menu of IO_Bus object (see below), one can instantiate
up to 10 I/O modules (Safety or Non-safety ones) located centrally on the Non-Safety CPU.
Fig. 78: Open “Add Device…” menu
6. Similarly, up to 10 I/O modules (Safety and Non-safety) can be instantiated on any ABB PROFINET IO
device.
Configuration and programming
System configuration and programming > Instantiation and configuration of safety modules/Definition of variable names
30.03.2017 AC500-S 183