Ä AC500 User Documentation for more details on “Communication Parameters”.
Fig. 94: Example with a serial connection
Now, you shall be able to login to your Safety CPU, download your safety application and create a
boot project so that your Safety CPU can start safety program execution after powering off/on.
NOTICE!
The “Online Change” service of CoDeSys is not supported by SM560-S Safety CPU for
safety reasons. It means that each program change of CoDeSys Safety project requires
stopping SM560-S, downloading a new boot project and then powering off/on or rebooting
through PM5xx to see the safety program change(s) become active.
Configuration and programming
System configuration and programming > Programming of AC500-S Safety CPU
30.03.2017 AC500-S 207
To Next Page
Loading...
