ABB AC500-S - Page 388

Name Data Type Initial Value Description, Parameter Values
S_EDM_Out BOOL FALSE Controls the actuator. The result is monitored by
the feedback signal S_EDMx.
FALSE: Disable connected actuators.
TRUE: Enable connected actuators.
Error BOOL FALSE
Ä Table 32 “General Output Parameters”
on page 267
DiagCode WORD 16#0000
Ä Table 32 “General Output Parameters”
on page 267
Typical Timing Diagrams
Fig. 124: Timing diagrams for SF_EDM: S_StartReset = FALSE
Configuration and programming
AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib
30.03.2017AC500-S388