ABB AC500 - Page 137

____________________________________________________________________________________________________________
G1 Introduction to AC500 1-135 AC500 / Issued: 07.2006
The window is closed and the software tries to establish the connection via the gateway. If the
connection establishment is successful, the couplers are displayed in the
Device Information area.
Click into the field next to the coupler name to select the desired coupler (DPM) and confirm with
OK.
To perform the download, select the menu item
Online -> Download. A safety inquiry is displayed.
Answer with
Yes. The configuration is then transferred to the controller.
The address data used can be displayed using the menu item
View -> Address Table.
The digital inputs can be accessed via IB0 to IB5, the digital outputs via QB0 to QB2 and the analog
outputs via QW3 to QW11.