07 ELECTRICAL INSTALLATION
3BHS213401 E01 REV H ACS1000 AIR-COOLED USER MANUAL 102/184
7.6.1.4 Preparing cables for cable entries with cable glands
- Prepare the cables with an outer cable screen for EMC bonding with the metal enclosure of
the cabinet as illustrated in Fig. 7-16.
Figure 7-16: Preparing control cables for cable glands
(1) Outer cable sheath
(2) Cable gland
(3) Conductor insulation removed to expose cable
shield
(4) Plate
(5) Conductor screen extension to be connected to PE
terminal
1
5
2
3
4
To Next Page
Loading...
