ABB ACS800-02 - Removing the Pedestal (Frame Size R7)

Installation
50
Remove the pedestal (frame size R7):
1. Remove the lower front covers by undoing the fixing screws.
2. Undo the red screws that fix the pedestal to the frame from front.
3. Undo the red M8 combi screws (8 pcs or 9 pcs with +D150) that connect the busbars of the pedestal to the upper
frame. Use a torque wrench with an extension bar.
4. Wheel the drive frame out by using the handle.
4
Wheeling the frame out
1
2
2
1
3
3
3
3
ProE: ACS800-02-R7_manual2.drw
2
2
3
3
3
2 pcs
3