154 Parameters
Const Bit pointer setting (see Terms and abbreviations on page 93). -
Pointer
21.05 Speed share Defines the scaling factor for speed reference 1/2 (speed
reference 1 or 2 is multiplied by the defined value). Speed
reference 1 or 2 is selected by parameter 21.04 Speed ref1/2
sel.
-8.000 …8.000 Speed reference scaling factor. 1000 = 1
21.07 Speed ref jog1 Defines the speed reference for jogging function 1. For more
information on jogging, see page 63.
-30000 … 30000
rpm
Speed reference for jogging function 1. 1 = 1 rpm
21.08 Speed ref jog2 Defines the speed reference for jogging function 2. For more
information on jogging, see page 63.
-30000 … 30000
rpm
Speed reference for jogging function 2. 1 = 1 rpm
21.09 SpeedRef min abs Defines the absolute minimum limit for the speed reference.
0 … 30000 rpm Absolute minimum limit for speed reference. 1 = 1 rpm
21.10 Mot pot func Selects whether the value of the motor potentiometer is
retained upon drive power-off.
Reset Drive power-off resets the value of the motor potentiometer. 0
Store The value of the motor potentiometer is retained over drive
power-off.
1
21.11 Mot pot up Selects the source of motor potentiometer up signal.
DI4 Digital input DI4 (as indicated by 02.01 DI status, bit 3). 1073938945
DI5 Digital input DI5 (as indicated by 02.01 DI status, bit 4). 1074004481
DI6 Digital input DI6 (as indicated by 02.01 DI status, bit 5). 1074070017
Const Bit pointer setting (see Terms and abbreviations on page 93). -
Pointer
No. Name/Value Description FbEq
20.01
Maximum speed
21.09
SpeedRef min abs
-(21.09
SpeedRef min abs)
20.02
Minimum speed
Speed reference
Limited speed reference
To Next Page
Loading...
