ABB Advant Controller 450 Product Guide

Advant Controller 450 Product Guide
3BSE 015 953R201 Rev B 8-26
Table 8-47. Redundant Analog Input/Output Sets for S100 I/O
Description Consists of Article No.
With redundancy: 8 input channels,
resolution 12 bits, single-ended, 0 to +10 V or
0 to +20 mA, shunt 250 Ω 0.05%
With redundancy: 8 output channels,
resolution 12 bits,
0 to +20 mA or 0 to +10 V (over shunt 500 Ω
0.1% on DSTA 001A or DSTA 001B)
2 x DSAX 110
DSTA 001A
2 x DSTK 223L3
or
2 x DSAX 110A
DSTA 001B
2 x DSTK 223L3
3BSE019920R1
Table 8-48. Pulse Input and Positioning Sets for S100 I/O
Description Consists of Article No.
Positioning set for one positioning loop
Pulse encoder input: 3 ch., ±15mA, max. 80 kHz
DI/DO: 24 V d.c.
AO: resolution 11 bits, 0 to ±10 V or 0 to ±20 mA
DSDP 140A
DSTD 190
DSTK 225SL3
3BSE019921R1
Positioning Set for one positioning loop
Pulse encoder input: 3 ch., ±15mA,max. 80 kHz
DI/DO: 24 V d.c.
AO: resolution 11 bits, 0 to ±10 V or 0 to ±20 mA
Disconnectible screw terminal blocks
DSDP 140A
DSTD 150A
DSTK 225SL3
3BSE019922R1
Pulse counting set 12 ch., 5/12/24 V d.c. max.
10 kHz
DSDP 150
DSTD 190
DSTK 225SL3
3BSE019923R1
Pulse counting set 12 ch., 5/12/24 V d.c. max.
10 kHz
Disconnectible screw terminal blocks
DSDP 150
DSTD 150A
DSTK 225SL3
3BSE019924R1
Pulse counting set 4 measuring systems each
containing:
Pulse encoder input: 2 ch. + strobe
5/12/24 V or ±15 mA, max. 2.5 MHz
DI: 24 V d.c. DO: 24 V, 250 mA d.c.
DSDP 170
DSTX 170
DSTK 228SL3
3BSE019925R1

ABB Advant Controller 450 Specifications

General

Brand	ABB
Model	Advant Controller 450
Category	Controller
Language	English