16 Installation Guide
—
Figure 8 CoreSense M10 analytical unit touchscreen (Alarms and events panel)
Sensor head and communication cable
As part of the CoreSense M10 multi-gas monitoring system, the sensor head extracts gases from
the transformer and routes them through its permanently attached conduit for analysis inside the
analytical unit. LEDs provide status information about the ongoing processes (see “Maintenance and
troubleshooting” on page 71).
—
Figure 9 Overview of the CoreSense M10 sensor head (back)
Attached conduit
Earthing
lug
Rotating
flange
Sampling port
(hidden)
to the transformer valve
To Next Page
Loading...
