Configuring CoreSense M10 67
Setting the date and time
To set the system date and time:
1 From the CoreSense M10 dashboard (see Figure 47), click Settings. The Settings page appears.
—
Figure 51 CoreSense M10 Settings page
2 Click Administration settings and enter your password (for more information on setting passwords,
see page 65).
3 In the Analyzer settings section of the Settings page, click the small calendar icon to the right of the
Analyzer date/time field. A calendar appears where you can select a date and enter the time.
—
Figure 52 Accessing the analyzer calendar
To Next Page
Loading...
