ABB CoreSense M10 - Configuring for Transformer Fluid Type

Introducing the CoreSense M10 17
—
Figure 10 Overview of the CoreSense M10 sensor head (front)
LEDs
NOTICE
The length of the conduit attached to the sensor head is 10 meters (33 feet). Make sure
that the distance between the sensor head and analytical unit is at most 10 meters.
Sensor head status LEDs
The meanings of the various analysis sensor head status LEDs are explained in “Maintenance and
troubleshooting” on page 71.
—
Figure 11 Sensor head status LEDs