Maintenance and troubleshooting 77
—
Figure 61 Firmware update page
Your system reboots once the firmware is updated.
9 After the system has been automaticaly rebooted, return to the web page and click About
Coresense™ M10 to make sure that the application version is the one given to you by the ABB service
representative.
Updating with a USB key
NOTICE
If the update process do not seem to work on your first try, try it again with a different
brand of USB key or update remotely (see “Updating with a web browser” on page 76).
1 From your computer, extract the zip file sent to you by the ABB service representative at the root
level of a USB key.
2 Open the CoreSense M10 cabinet.
3 Shutdown the instrument using the main power switch.
—
Figure 62 Instrument main power switch
4 Insert the USB key on the USB port of the CoreSense M10 cabinet.
To Next Page
Loading...
