I/O Modules Definitions
ID
Module identification number (at this time it cannot be
modified): it starts from 97 and the last digit indicates
the channel number of the module
Module type
It is automatically recognized when the module is added
and assigned.
Module name
It is possible to define the module name (max 30 ASCII
characters)
Channel type
It is possible to select the channel type from dropdown
menu. If a new channel type is needed it is possible to
create a new one by typing a new one.
Device type
It is possible to select the device type from dropdown
menu. If a new device type is needed it is possible to
create a new one by typing a new one.
Channel tag name
It is possible to define the channel tag name (max 30 ASCII
characters)
Node
Defines the node in which the channel is assigned in the
“Tree view” configuration. It is automatically filled once
the channel is configured in the “Tree view” page
Group
Defines the group in which the channel is added in the
“Groups” configuration. It is automatically filled once the
channel is added in the “Groups” page
Pulse weight
In case of pulse type channel it is possible to define the
weight for the received pulses. The minimum number is
0.001
Pulse unit
In case of pulse type channel it is possible to select the
unit of measurement from the dropdown menu
Action
Reset Resets all the settings of the related module
Remove Removes the related module
[Click a row]
By clicking a row, the row is highlighted in light blue and
the corresponding box is checked. Additionally the LED of
the selected sensor will start to blink.
40 SCU100 INSITE PRO M COMPACT USER MANUAL
To Next Page
Loading...
