11.3.Communication
IP
The following information have to be set to correctly have access to the user interface via IP:
IP Mode
DHCP or static (Note: With DHCP you can find and
define an IP address via the router by MAC address or
device/host name - insite) The fallback IP address is:
192.168.1.200:8000
IP Address
Current IP address of device or possibility to define a new
IP address
Subnet Mask
Current Subnet Mask or possibility to define another
Subnet Mask
Gateway
Current Gateway or possibility to define another Gateway
Address
DNS Server
Default: 8.8.8.8 or possibility to define another DNS
Server
Host name Insite or possibility to define another Host Name
MAC Address Shows the MAC Address of the device
Apply By clicking the Apply pushbutton changes are stored
Inappropriate settings may cause the user interface to become inaccessible. In order to be able to restore
device access to the fallback IP, please use the reset button.
(The device is visible when DHCP is active).
SCU100 INSITE PRO M COMPACT USER MANUAL 49
To Next Page
Loading...
