1.General Information
This manual contains all the safety information, the technical aspects and the operating necessary to
ensure the correct use of the device and maintain it in safe conditions.
1.1.Use and Storage of the manual
Storing
The manual must be stored close to the device; safe from liquids and anything else which may
compromise its legibility. The manual and the declaration of conformity are both an integral part of the
device until it is dismantled. If the manual is lost or illegible please request a copy from the manufacturer.
Copyright
The copyright of this manual is the property of ABB Ltd. This manual contains texts, designs and
illustrations of a technical nature which must not be disclosed or transmitted to third parties, even
partially, without the written authorisation of ABB Ltd.
Liability disclaimer
The information contained in this document is subject to change without notice and cannot be
considered as an obligation by ABB Ltd. ABB Ltd. is not liable for any errors that may appear in this
document. ABB Ltd. is not liable under any circumstances for any direct, indirect, special, incidental or
consequential damage of any kind that may arise from using this document. ABB Ltd. is also not liable for
incidental or consequential damage that may arise from using the software or hardware mentioned in
this document.
Brand
ABB Ltd. is a registered trademark of ABB Group. All other brands or product names mentioned in this
document are trademarks or registered trademarks of their respective owners.
Meaning of symbols
Warning – can result in death or
serious personal injury
Non-safety related, but useful
and important information
CE conformity mark Torque
Observe the accompanying
documents
Disposal
Installation,
electrotechnical expertise
Equipment protected throughout
by reinforced insulation
SCU100 INSITE PRO M COMPACT USER MANUAL 5
To Next Page
Loading...
