13.4.Data export
In order to carry out data export via email and/or FTP, contact data for email and FTP server need to
be configured (see Settings Email, FTP). Here you can export and/or download measurement and/or
historical alarms of the configured devices and edit data export settings:
Settings
Data
Select type of data: “Total energy”, “Energy per phase”,
“Instantaneous Values”, “Harmonics”.
Frequency
It indicates how often you would like to receive
notifications.
Export time Time, when the data shall be exported.
Export option
Two options can be selected: “One-time export” and
“Perodic exporting”.
Export via email
If selected, mains and branches values will be exported
as csv file by email.
Please note that email configuration is needed.
Export via FTP
If selected, mains and branches values will be exported
as csv file by FTP.
Please note that FTP configuration is needed.
Data stack
Export data stack of last 1000 of 10 sec, 15 minutes, hour,
day and week values.
Historical events
If selected, historical events wil be exported as .csv file
via FTP according to the defined event log size.
SCU100 INSITE PRO M COMPACT USER MANUAL 61
To Next Page
Loading...
