13.2.Benchmark
Here it is possible to make comparisons between:
• Measurements of two different devices in the same time interval (By device)
• Measurements of one single device in two different time intervals (By period)
As in “Historical values” the resolution depends on the device selected and binds the maximum time
interval that can be shown.
13.3.Alarms log
Here it is possible to show all the alarms that occurred. Here the table is automatically refreshed every
second and displays the 100 latest events. Scrolling the table, more alarms are loaded.
Rows can be sorted and/or filtered by clicking at headers and selecting desired value from drop-down lists.
Alarms must previously be set in the “Alarms” configuration menu.
Event status is updated automatically every second to obtain new alarms occurrences.
It is possible to visualize and export occurrences according to user-defined start and end date/time.
60 SCU100 INSITE PRO M COMPACT USER MANUAL
To Next Page
Loading...
