Current sensors
Here it is possible to visualize “Real-time values” for the current sensors.
Sensors have to be first assigned and configured (please refer to Configuration - Devices – Current
sensors).
In case of DC sensor measurement, please refer to “Configuration - Devices – Current sensors” and
configure “Phase” as DC and voltage setting in “Configuration-Devices-Control Unit”.
Accordingly, when “DC” is displayed under “Phase”, DC current and active power values are displayed on
this page.
Meters
Here it is possible to visualize “Real-time values” for the meters.
In the “Values” dropdown list it is possible to select the parameters accordingly with the “Meter”
selected. Available values showed are: “Energy values”, “Instantaneous Values”, “Power Quality Values”,
“Harmonics”, “Maximum Values”.
SCU100 INSITE PRO M COMPACT USER MANUAL 57
To Next Page
Loading...
