xx0500002500
Instruction labelC
Instruction label concerning lifting the robotE
Warning label concerning risk of tippingF
Warning label concerning stored energyH
Information label at base, Kyodo Yushi TMO 150 in gearboxesL
Required tools and equipment
Visual inspection, no tools are required.
Inspecting, labels
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded space.
1
Inspect the labels, located as shown in the figures.2
Article numbers for the labels and
plate set is specified in Spare part
lists on page 353.
Replace any missing or damaged labels.3
Product manual - IRB 660 111
3HAC025755-001 Revision: W
© Copyright 2006-2020 ABB. All rights reserved.
3 Maintenance
3.3.6 Inspecting the information labels
Continued
To Next Page
Loading...
