3.3.10 Inspection, position switch axis 1
Position switch, axes 1
The illustration below shows the position switch for axis 1.
xx0100000158
Position switch, axis 1A
CamB
Set screw, camC
Protection sheetD
RailE
Rail attachmentF
Required equipment
NoteArt.noEquipment
3HAC 024854-001Position switch, axis 1
Content is defined in section
Standard tools on page 347.
-Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Continues on next page
118 Product manual - IRB 660
3HAC025755-001 Revision: W
© Copyright 2006-2020 ABB. All rights reserved.
3 Maintenance
3.3.10 Inspection, position switch axis 1
To Next Page
Loading...
