ABB ProcessMaster FET632 - 14 Additional Documents

142 FEP630, FEH630 ELECTROMAGNETIC FLOWMETER | OI/FEP630/FEH630-EN REV. D
… 13 Specification
… HygienicMaster – Material load for process connections
Flange devices
G10215
0
5
10
15
20
25
30
35
40
45
-30 -10 10 30 50 70 90 110 130 150 170 190 [°C]
-22 14 50 86 122 158 194 230 266 302 338 374 [°F]
0
72.5
145.0
217.5
290.0
362.5
435.0
507.5
580.0
652.5
PN 40
PN 25
PN 16
PN 10
T
medium
P
medium
[bar]
P
medium
[psi]
Figure 91: DIN flange, stainless steel, up to DN 100 (4 in)
G10216
CL 300
CL 150
0
5
10
15
20
25
30
35
40
45
50
55
-30 -10 10 30 50 70 90 110 130 150 170 190 [°C]
-22 14 50 86 122 158 194 230 266 302 338 374 [°F]
72.5
145.0
217.5
290.0
362.5
435.0
507.5
580.0
652.5
725.5
797.5
0
T
medium
P
medium
[bar]
P
medium
[psi]
Figure 92: DIN flange, stainless steel, up to DN 100 (4 in) (CL 150 / 300)
JIS 10K-B2210 flange
DN Material PN T
medium
P
medium
DN 25 to 100
(1 to 4 in)
Stainless steel 10 −25 to 130 °C
(−13 to 266 °F)
10 bar (290 psi)
(145 psi)
Wafer type devices
G12040
0
5
10
15
20
25
30
35
40
45
-30
-22
-10
14
10
50
30
86
50
122
70
158
90
194
110
230
130
266
[°C]
[°F]
PN 40 /
300CL
PN 25
PN 16 /
Cl150
PN 10
T
medium
P
medium
[bar]
P
medium
[psi]
0
72.5
145
217.5
290
362.6
435
507.6
580
652.6
Figure 93: Wafer type design
JIS 10K-B2210 wafer type design
DN Material PN T
medium
P
medium
DN 32 to 100
(1 ¼ to 4 in)
1.4404
1.4435
1.4301
10 −25 to 130 °C
(−13 to 266 °F)
10 bar (290 psi)
(145 psi)
14 Additional documents
Note
• An additional document with Ex safety instructions is
available for measuring systems that are used in potentially
explosive atmospheres.
• Ex safety instructions are an integral part of this manual. As
a result, it is crucial that the installation guidelines and
connection values it lists are also observed.
The icon on the name plate indicates
the following:
Note
All documentation, declarations of conformity, and certificates
are available in ABB's download area.
www.abb.com/flow
Dimensions in the Datasheet
Trademarks
HART is a registered trademark of FieldComm Group, Austin, Texas, USA
Modbus is a registered trademark of the Modbus Organization
PROFIBUS and PROFIBUS DP are registered trademarks of PROFIBUS &
PROFINET International (PI)
LINATEX is a registered trademark of Linatex Ltd.
Hastelloy is a registered trademark of Haynes International, Inc.
Change from two to one column