IEC 61850 or function
name
ANSI Function description Generator
REG670
(Customized)
HSR IEC 62439-3 High-availability seamless redundancy 0-1
PMUCONF,
PMUREPORT,
PHASORREPORT1,
ANALOGREPORT1
BINARYREPORT1,
SMAI1 - SMAI12
3PHSUM
PMUSTATUS
Synchrophasor report, 16 phasors (see Table
7) 0-1
PTP Precision time protocol 1
FRONTSTATUS Access point diagnostic for front Ethernet port 1
SCHLCCH Access point diagnostic for non-redundant Ethernet port 6
RCHLCCH Access point diagnostic for redundant Ethernet ports 3
DHCP DHCP configuration for front access point 1
QUALEXP IEC 61850 quality expander 96
Remote communication
BinSignRec1_1
BinSignRec1_2
BinSignReceive2
Binary signal transfer receive 3/3/6
BinSignTrans1_1
BinSignTrans1_2
BinSignTransm2
Binary signal transfer transmit 3/3/6
BinSigRec1_12M
BinSigRec1_22M
BinSigTran1_12M
BinSigTran1_22M
Binary signal transfer, 2Mbit receive/transmit 3
LDCMTRN Transmission of analog data from LDCM 1
LDCMTRN_2M Transmission of analog data from LDCM, 2Mbit 6
LDCMRecBinStat1
LDCMRecBinStat2
LDCMRecBinStat3
Receive binary status from remote LDCM 6/3/3
LDCMRecBinS2_2M Receive binary status from LDCM, 2Mbit 3
LDCMRecBinS3_2M Receive binary status from remote LDCM, 2Mbit 3
Table 7: Number of function instances in Synchrophasor report, 16 phasors
Function name Function description Number of instances
PMUCONF Configuration parameters for C37.118 2011 and IEEE1344 protocol 1
PMUREPORT Protocol reporting via IEEE 1344 and C37.118 2
PHASORREPORT1 Protocol reporting of phasor data via IEEE 1344 and C37.118, phasors 1-8 2
ANALOGREPORT1 Protocol reporting of analog data via IEEE 1344 and C37.118, analogs 1-8 2
Table continues on next page
1MRK 502 071-UUS A Section 2
Application
Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062 57
Application manual
To Next Page
Loading...
