ABB REM620 - Protection Related Functions; DR.RDRE1 Disturbance Recorder; LD0.CCRDIF1 Current Circuit Failure Protection; LD0.SEQRFUF1 Fuse Failure Protection

2.3.6 Protection related functions
2.3.6.1 DR.RDRE1 Disturbance recorder
Table 68: DR.RDRE1 Disturbance recorder
IEC 61850 name SA name Description Values
DR.RDRE1
.RcdMade.stVal DR recording made 1=Made
2.3.6.2 LD0.CCRDIF1 Current circuit failure protection
Table 69: LD0.CCRDIF1 Current circuit failure protection
IEC 61850 name SA name Description Values
LD0.CCRDIF1
.Alm.stVal FAIL Fail Alarm 1=Alarm
.Op.general ALARM Fail Operate 1=Operate
2.3.6.3 LD0.SEQRFUF1 Fuse failure protection
Table 70: LD0.SEQRFUF1 Fuse failure protection
IEC 61850 name
SA name Description Values
LD0.SEQRFUF1
.Str.general FUSEF_U General start 1=Start
.Str3Ph.general FUSEF_3PH Three-phase start 1=Start
2.3.6.4 LD0.SECRSYN1 Synchrocheck
Table 71: LD0.SECRSYN1 Synchrocheck
IEC 61850 name
SA name Description Values
LD0.SECRSYN1
.SynPrg.stVal SYNC_INPRO Synch in progress 1=In progress
.FailCmd.stVal CMD_FAIL_AL CB close request failed 1=Failed
.FailSyn.stVal CL_FAIL_AL CB close command failed 1=Failed
1MRS757656 A Section 2
DNP3 data mappings
REM620 35
Point List Manual