ABB REM620 - 2.3.5.35 LD0.JAMPTOC1 Stalled motor protection

2.3.5.34 LD0.FRPFRQ6 Frequency protection (6)
Table 60: LD0.FRPFRQ6 Frequency protection (6)
IEC 61850 name SA name Description Values
LD0.FRPTRC6
.Str.general START Stage start 1=Start
LD0.FRPTOF6 Overfrequency
.Op.general OPR_OFRQ -Operate 1=Operate
LD0.FRPTUF6 Underfrequency
.Op.general OPR_UFRQ -Operate 1=Operate
LD0.FRPFRC6 Frequency gradient
.Op.general OPR_FRG -Operate 1=Operate
2.3.5.35 LD0.JAMPTOC1 Stalled motor protection
Table 61: LD0.JAMPTOC1 Stalled motor protection
IEC 61850 name SA name Description Values
LD0.JAMPTOC1
.Op.general OPERATE Stage operate 1=Operate
2.3.5.36 LD0.MPDIF1 Motor differential protection (1)
Table 62: LD0.MPDIF1 Motor differential protection (1)
IEC 61850 name
SA name Description Values
LD0.MPDIF1
.Op.general OPERATE Stage operate 1 = Operate
2.3.5.37 LD0.MPTTR1 Motor thermal overload protection
Table 63: LD0.MPTTR1 Motor thermal overload protection
IEC 61850 name
SA name Description Values
LD0.MPTTR1
.AlmThm.general ALARM Thermal alarm 1=Alarm
.Op.general OPERATE Thermal operate 1=Operate
.StrInh.general BLK_RESTART Block restart 1=Restart
1MRS757656 A Section 2
DNP3 data mappings
REM620 33
Point List Manual