ABB REM620 - CTRL.DCCSWI4 Controllable Disconnector (4) Control; CTRL.ESCSWI1 Controllable Earth Switch (1) Control; CTRL.ESCSWI2 Controllable Earth Switch (2) Control; Sensors and Monitoring Functions

2.4.2.6 CTRL.DCCSWI4 Controllable disconnector (4) control
Table 110: CTRL.DCCSWI4 Controllable disconnector (4) control
IEC 61850 name SA name Description Type
CTRL.DCCSWI4
.Pos.Oper.ctlVal - Disconnector control On/Off
2.4.2.7 CTRL.ESCSWI1 Controllable earth switch (1) control
Table 111: CTRL.ESCSWI1 Controllable earth switch (1) control
IEC 61850 name SA name Description Type
CTRL.ESCSWI1
.Pos.Oper.ctlVal - Earth switch control On/Off
2.4.2.8 CTRL.ESCSWI2 Controllable earth switch (2) control
Table 112: CTRL.ESCSWI2 Controllable earth switch (2) control
IEC 61850 name SA name Description Type
CTRL.ESCSWI2
.Pos.Oper.ctlVal - Earth switch control On/Off
2.4.3 Sensors and monitoring functions
2.4.3.1 LD0.SSCBR1 Reset signals of CB condition monitoring
Table 113: LD0.SSCBR1 Reset signals of CB condition monitoring
IEC 61850 name
SA name Description Type
LD0.SSCBR1
.RsAccAPwr.Oper.ctlVal RST_IPOW Reset accum. energy On
.RsCBWear.Oper.ctlVal RST_CB_WEAR Reset CB life and op. counter On
.RsSprChaTm.Oper.ctlVal RST_SPR_T Reset spring charge alarm On
.RsTrvTm.Oper.ctlVal RST_TRV_T Reset travel time alarm On
Section 2 1MRS757656 A
DNP3 data mappings
48 REM620
Point List Manual